Топ спицами

Вязаный топ — это стильное и универсальное изделие, которое станет прекрасным дополнением к вашему гардеробу. Благодаря использованию качественных материалов и разнообразных техник вязания, такой топ не только выглядит привлекательно, но и обеспечивает комфорт в носке. Он идеально подходит для теплых дней, а также может стать основой для многослойного образа в прохладную погоду.

Для вязания топа рекомендуется использовать пряжу DROPS BELLE от Garnstudio. Эта пряжа состоит из 53% хлопка, 33% вискозы и 14% льна, что делает ее легкой, дышащей и приятной на ощупь. Выбирая цвет, можно остановиться на нежном старом розовом (номер 11), который придаст вашему образу романтичный и свежий вид. Не забудьте подготовить спицы: вам понадобятся круговые спицы размером 4 мм и 3.5 мм, а также чулочные спицы.

В процессе вязания используются различные техники, что делает изделие интересным и уникальным. Например, для создания основного узора применяется техника лицевой глади, которая обеспечивает гладкую поверхность. Также используются укороченные ряды для формирования V-образного выреза, что придаёт изделию особую форму и стиль. Вдобавок, для создания ажурных элементов в изделии используются накиды, которые придают легкость и воздушность. Эти накиды выполняются с особой тщательностью, чтобы избежать образования дырок, что особенно важно для аккуратного внешнего вида.

Кроме того, в процессе работы вам предстоит использовать маркеры для отслеживания прогресса в вязании и упрощения сложных участков. Это особенно полезно, когда вы работаете с несколькими узорами одновременно, как в этом случае с узорами A.1, A.2 и другими.

Как полезный совет, обратите внимание на плотность вязания: всегда проверяйте свой образец перед началом работы. Это поможет вам добиться идеального соответствия размера и позволит избежать неприятных сюрпризов в процессе вязания. Используйте специальный метр для измерения, чтобы убедиться, что ваша работа соответствует указанным параметрам — это особенно важно, если вы планируете дарить изделие или вяжете на заказ.

Pattern instructions

PATTERN:
See diagrams A.1 to A.13. The diagrams show all rows in pattern seen from RS. See diagram for correct size.

SHORT ROWS:
When turning in short rows, slip first st as if to K. Tighten thread and make sure to avoid big holes.

INCREASE TIP:
All inc are done from RS.
Inc 1 st by making 1 YO, on next row P YO twisted to avoid holes.
----------------------------------------------------------

TOP:
Work from the middle of V-neck and out in 3 triangles on front piece and 4 triangles on back piece, then work downwards.

FRONT PIECE:
Work back and forth from neck and down. Cast on 8 sts on circular needle size 4 mm / US 6 with Belle. K 1 row. On next row inc as follows: * K 1, 1 YO *, repeat from *-* until 1 st remains and finish with K 1 = 15 sts on needle. Work next row as follows (from RS): Work YOs from previous row twisted, they should not make holes. Work 3 sts in GARTER ST - see explanation above, A.1, insert 1st marker, A.1, insert 2nd marker, A.1 (= repeat A.1 3 times in total on row), finish with 3 sts in garter st. REMEMBER THE KNITTING GAUGE When A.1 has been worked 1 time vertically, there are 123-123-123-123-129-129 sts on needle. Piece measures approx. 11-11-11-11-12-12 cm / 4½"-4½"-4½"-4½"-4 3/4"-4 3/4" from cast-on edge.

Work next row as follows from RS: Work A.2 over the first 42-42-42-42-44-44 sts, A.3 over the next 39-39-39-39-41-41 sts and A.4 over the last 42-42-42-42-44-44 sts, after A.4 cast on 8 sts at the end of row for shoulder (see diagram). Work A.4 to A.2 on next row, after A.2 cast on 8 sts at the end of row for shoulder (see diagram).

When A.2 to A.4 have been worked 1 time vertically, there are 165-165-183-183-193-193 sts on needle. Piece measures approx. 15-15-17-17-19-19 cm / 6"-6"-6 3/4"-6 3/4"-7½"-7½" from cast-on edge.

READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING! WORK PATTERN AS BEFORE WHILE AT THE SAME TIME WORKING SHORT ROWS IN EACH SIDE OF PIECE.
PATTERN:
Work next row as follows from RS: Work 1 st in garter st, 48-48-52-52-55-55 sts in stockinette st, work A.5 over the next 6 sts, (marker), A.6 over the next 6 sts, 43-43-53-53-57-57 sts in stockinette st, A.7 over the next 6 sts, (marker), A.8 over the next 6 sts, 48-48-52-52-55-55 sts in stockinette st, finish with 1 st in garter st. Repeat A.5 to A.8 over the 6 sts on each side of each marker 2-3-2-3-4-5 times in total, then repeat the first 0-0-6-4-4-4 rows of A.5 to A.8 1 more times.
SHORT ROWS:
AT THE SAME TIME when 2-6-0-2-0-6 rows of A.5 to A.8 have been worked, work SHORT ROWS - see explanation above - in each side of piece as follows: Work until 26-26-24-23-18-18 sts remain on row (work A.5 to A.8 as before), turn and work until 26-26-24-23-18-18 sts remain, turn piece. Then work short rows in the different sizes as follows:
SIZE M:
Work 6 sts less for every turn 2 times in each side of piece.
SIZE L-XL:
Work 6 sts less for every turn 1-2 times in each side of piece, then work 4 sts less on every turn 3-2 times in each side of piece.
SIZE XXL-XXXL:
Work 6 sts less for every turn 1-1 time in each side of piece, then work 4 sts less for every turn 4-4 times in each side of piece, then work 2 sts less on every turn 4-5 times in each side of piece.

ALL SIZES:
When the short rows have been worked, work last row from WS, so that next row beg from shoulder.
Then work over all sts from RS as follows: Work in garter st over the first 42-44-46-48-50-52 sts AT THE SAME TIME inc 0-2-4-4-6-6 sts evenly, work as before (i.e. A.5 to A.8 and stockinette st) until 42-44-46-48-50-52 sts remain, work in garter st over the last sts AT THE SAME TIME inc 0-2-4-4-6-6 sts evenly (= 42-46-50-52-56-58 sts in garter st in each side of piece).

Work 3 rows in garter st over the outermost 42-46-50-52-56-58 sts in garter st in each side of piece, pattern and stockinette st over the remaining sts. On next row from WS work as follows: bind off with K over the first 40-44-48-50-54-56 sts for armhole, work 2 sts in garter st, work in stockinette st and pattern as before until 42-46-50-52-56-58 sts remain, 2 sts in garter st, bind off with K over the last 40-44-48-50-54-56 sts for armhole. Cut the yarn. 8-8-8-12-12-12 rows of A.5 to A.8 remain. Beg next row from RS.

Continue to work in garter st over the first and last 2 sts in each side of piece. When A.5 to A.8 have been worked, there are 23-25-26-27-32-34 sts before 1st marker, 79-91-99-107-123-135 sts between 1st and 2nd marker and 23-25-26-27-32-34 sts after 2nd marker = 125-141-151-161-187-203 sts in total on row.

Piece measures approx. 21-24-25-27-32-35 cm / 8 1/4"-9½"-9 3/4"-10½"-12½"-13 3/4" on the widest measured from cast-on edge. Insert 1 marker in piece, NOW MEASURE PIECE FROM HERE. On next row from RS loosely bind off the first 22-24-25-26-31-33 sts with K, work 1 edge st in garter st, (marker), work A.9 over the first 6 sts after marker, stockinette st over the next 67-79-87-95-111-123 sts, A.10 over the last 6 sts before second marker, (marker), 1 edge st in garter st, loosely bind off the last 22-24-25-26-31-33 sts = 81-93-101-109-125-137 sts remain on needle. Cut the yarn. Work next row from WS over the remaining sts as follows: 1 edge st in garter st, A.10 as before, stockinette st over the next 67-79-87-95-111-123 sts, A.9 as before, 1 edge st in garter st. When A.9 and A.10 have been worked 1 time vertically, continue in stockinette st with 1 edge st in garter st in each side of piece.

When piece measures 3 cm / 1'' from marker, inc 1 st in each side of piece inside 1 edge st (= 2 sts inc) - READ INCREASE TIP. Repeat inc every 1½-1½-1½-1-1-1 cm / ½"-½"-½"-3/8"-3/8"-3/8" 12-10-12-14-12-13 times in total = 105-113-125-137-149-163 sts on needle. When piece measures 23-23-24-24-23-23 cm / 9"-9"-9½"-9½"-9"-9" from marker (piece measures 53-55-57-59-61-63 cm / 21''-21 5/8''-22½''-23¼''-24''-24¾'' in total from shoulder), adjust so that next row is from RS, switch to circular needle size 3.5 mm / US 4. Work next row from RS as follows: Work 1 edge st in garter st, work A.11 (= 2 sts) until 2 sts remain, work first st in A.11, finish with 1 edge st in garter st. On row with holes (i.e. 7th row) work next to last st K. Bind off when A.11 has been worked 1 time vertically. Piece measures 56-58-60-62-64-66 cm / 22''-22¾''-23 5/8''-24 3/8''-25¼''-26'' in total from shoulder.

BACK PIECE:
Piece is first worked in the round, then worked as front piece. Cast on 6 sts on double pointed needles size 4 mm / US 6 with Belle, switch to circular needle when needed. K 1 row. On next row inc as follows: * K 1, 1 YO *, repeat from *-* = 12 sts on row, K YOs twisted on next row, they should not make holes. Work A.1 4 times in total, insert 1 marker between each A.1 (= 4 markers). When A.1 has been worked 1 time vertically, there are 156-156-156-156-164-164 sts on needle. Continue as follows: A.12 over the first 39-39-39-39-41-41 sts, work A.3 over the next 39-39-39-39-41-41 sts and A.13 over the last 39-39-39-39-41-41 sts, slip the remaining sts on a stitch holder for neck edge (= 39-39-39-39-41-41 sts), after A.13 cast on 11 sts at the end of row for shoulder (see diagram). Then work back and forth on needle. Work A.13/A.3/A.12 on next row, after A.12 cast on 11 sts at the end of row for shoulder (see diagram). When A.12/A.3/A.13 have been worked 1 time vertically, there are 165-165-183-183-193-193 sts on needle. Piece measures approx. 15-15-17-17-19-19 cm / 6"-6"-6 3/4"-6 3/4"-7½"-7½" from cast-on edge. Now continue back piece as front piece.

NECK EDGE:
Worked back and forth on needle. Slip sts from stitch holder for neck edge on back piece back on circular needle size 3.5 mm / US 4. Work 2 ridges. Fasten ridges where sts were cast on for shoulder. Fasten off.

ASSEMBLY:
Sew the side seams inside 1 edge st in garter st. Sew shoulder seams inside 1 edge st in garter st. Tighten tog the middle (i.e. cast-on edge) on both front and back piece.

 

Diagram

All measurements in charts are in cm.

	= K from RS, P from WS
	= P from RS, K from WS
	= K 2 tog
	= slip 1 st as if to K, K 1, psso
	= 1 YO between 2 sts, P YO on next row to make hole
	= 1 YO between 2 sts, P YO twisted on next row, it should NOT make a hole
	= 1 YO between 2 sts, K YO on next row to make hole
	= slip 2 sts tog as if to K, K 1, pass the 2 slipped sts over
	= cast on st - see pattern
	= knitting direction